(3).
RS485/Meter
a.
RS 485
RS485 is one standard communication interface which can transmit the
realtime data from inverter to PC or other monitoring devices.
b.
Meter(optional)
The inverter has integrated export limitation functionality. To use this function,
a power meter or a CT must be installed. If the power meter is used, it should be
installed in the grid side. The dual-direction meter corresponds to the meter in
grid connection mode.
How to change the country code
a) Short press the touch key to go to the setting selection and long press the
touch key to enter the setting page;
b) Short press the touch key until see the Safety selection, and long press the
touch key to enter the safety page;
c) Short press the touch key to select the country. When the page reach to
the right country code please long press the touch key to save.
Export limitation setting
To Next Page
Loading...
