3.2 Application Overview
When the scan tool boots up, the Home screen opens. This screen shows all applications loaded
on the unit.
Following applications are preloaded into the scanner:
● OBDII/EOBD – leads to OBDII screens for all 9 generic OBD system tests.
● VW – leads to screens for diagnostic trouble code information, live datastream, ECU
information, active test, special functions, oil service and EPB maintenance applications on
Audi, Seat, Skoda and Volkswagen vehicles sold worldwide since 1990.
● Setup – leads to screens for adjusting default settings to meet your own preference and view
information about the scanner.
● Playback – leads to screens for access to saved data files.
Figure 3.1 Sample Home Screen
3.3 Input Dialog Box
This section illustrates how to use the scan tool to input letters and numbers, such as VIN number,
channel number, test values and DTC number. Typically, you may be required to input letters or
numbers when you are doing any of the following operations.
● VIN entry
● input channel number
● set adaptation value
● enter block number
● enter login code
● key matching
● look up DTCs
The scan tool provides 4 different types of keyboard to meet your specific needs. Depending on
the needs of text entry, it automatically shows the most suitable keypad.
● classic QWERTY keyboad for input of texts that contain both letters and numbers
● numeric keyboard for input of numbers
● alphabet keyboard for input of letters
● hexadecimal keyboard for special functions, such as key matching, UDS coding
To input text with the scan tool:
1. When you are requested to input text, press the function key Keyboard.
To Next Page
Loading...