Foxwell NT500 - Security Access (Login)

NT500 VAG Scanner User’s Guide_English Version_V1.00
28
Figure 4-36 Sample Advanced ID Screen
3. Press function key Save to store ECU information. Or use the BACK key to exit.
4.1.3.9 Security Access (Login)
The Security Access function performs a security access request to the control module. Some
(but not all) control modules require a valid login code before you can Recode or change
Adaptation values. On others, it "enables" certain features like cruise control. Valid Login codes
can be found in the Service Manual for your car.
Typical menu options may include:
● 5 SN
● 7 SN
NOTE
You get only one chance to enter the correct login number. If you enter the wrong number, turn off
the ignition and wait 10 seconds before another attempt.
5 SN
5 SN function allows to perform 5-digit security codes access request to the control module.
To login with a 5-digit security code:
1. Select Security Access (Login) from Function Menu and press the ENTER key.
Figure 4-37 Sample Function Menu Screen
2. Select 5 SN from the menu and press the ENTER key.