Foxwell NT500 - Parking Brake Test

NT500 VAG Scanner User’s Guide_English Version_V1.00
41
2. Press the function key Start. Listen carefully and you will hear the EPB closing.
Figure 4-67 Sample Close Parking Brake Operation Screen
3. When it is done closing, the screen will show “Successful”.
Figure 4-68 Sample Close Parking Brake Success Screen
4. Press the Back key to return.
4.2.2.3 Parking Brake Test
Parking Brake Test menu allows to perform a function test on EPB to check if there are any fault
codes stored.
To perform a function test on EPB:
1. Select Parking Brake Test from the Electronic Parking Brake (EPB) menu and press the
ENTER key.
Figure 4-69 Sample EPB Menu Screen