Figure 4-76 Sample Recalibration Operation Screen
7. Press the function key OK to continue and when the recalibration completed, the following
screen displays.
Figure 4-77 Sample Recalibration Done Screen
8. Press function key OK to finish the test or use Back key to return to the function menu.
5 OBDII/EOBD Operations
OBD-II/EOBD menu lets you access all OBD service modes. According to ISO 9141-2, ISO
14230-4, and SAE J1850 standards, the OBD application is divided into several sub programs,
called ‘Service $xx’. Below is a list of OBD diagnostic services:
● Service $01 - request current powertrain diagnostic data
● Service $02 - request powertrain freeze frame data
● Service $03 - request emission-related diagnostic trouble codes
● Service $04 - clear/reset emission-related diagnostic information
● Service $05 - request oxygen sensor monitoring test results
● Service $06 - request on-board monitoring test results for specific monitored systems
● Service $07 - request emission-related diagnostic trouble codes detected during current or
last completed driving cycle
● Service $08 - request control of on-board system, test or component
● Service $09 - request Vehicle Information
When OBDII/EOBD application is selected from Home screen, the scanner starts to detect the
communicaiton protocol autometically. Once the connection has established, a menu that lists all
of the tests available on the identified vehicle displays. Menu options typically include:
● System Status
● Read Codes
● Freeze Frame Data
● Erase Codes
To Next Page
Loading...