Foxwell NT500 - Page 43

NT500 VAG Scanner User’s Guide_English Version_V1.00
43
3. Enter the measured thickness (3-14 mm) and press Finish to confirm. Or press Back to abort
and return.
Figure 4-73 Sample Input New Thickness Screen
4. Wait a few seconds while new thickness is being stored. When a new thickness is stored,
following screen shows.
Figure 4-74 Sample Stored New Pad Thickness Screen
5. Press the function key OK to continue to recalibrate the EPB.
Figure 4-75 Sample Recalibration Screen
6. Press the function key OK to continue and wait until the recalibration is completed.