Figure 5-31 Sample Can vehicle test screen
4. Press the BACK key to exit and return.
5.9 Component Test
Component Test allows the scanner to control operation of vehicle components, tests or systems.
NOTE
● Some manufacturers do not allow tools to control vehicle systems.
● The manufacturer sets the criteria to automatically stop test. Refer to appropriate vehicle service
manual before using this function.
To perform a component test:
1. Scroll with the arrow keys to highlight Component Test from Diagnostic Menu and press the
ENTER key. A screen with a list of available tests displays.
Figure 5-32 Sample Diagnostic Menu Screen
2. Scroll with the arrow keys to highlight a system or component, press the ENTER key to start
test and the scanner displays the message “Command Sent!”.
To Next Page
Loading...