displayed. There is no description of the data value, only the value and unit is displayed. For
interpretation of the values, refer to the VAG system-specific workshop manual.
NOTE
Multiple channels are not permitted in Basic Settings. The data presented in each Basic Settings
channel varies greatly from control module to control module and between different models and
years. Some channels are documented in the Service Manuals, but many are not.
To perform basic settings
1. Select Basic Settings from Function Menu and press the ENTER key.
Figure 4-43 Sample Function Menu Screen
2. Enter a valid channel number (000 - 255 on most control modules) and press the function key
Finish.
Figure 4-44 Sample Basic Setting Screen
3. A screen with detailed data of this channel displays. When more than 3 function keys display,
use the left and right arrow keys to select a command and press the ENTER key to confirm.
To Next Page
Loading...