EasyManua.ls Logo

Foxwell NT500 - Open Parking Brake; Close Parking Brake

Foxwell NT500
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NT500 VAG Scanner User’s Guide_English Version_V1.00
39
4.2.2.1 Open Parking Brake
Open Parking Brake menu allows to open the rear caliper for repairs.
To open the rear calliper:
1. Connect the scan tool to vehicle power and turn ignition on.
2. Cycle the EPB on and off using the switch in your vehicle. Ensure it is disengaged before
continuing.
3. Select Electronic Parking Brake (EPB) from Maintenance Function menu.
Figure 4-61 Sample Maintenance Menu Screen
4. A screen asking you if you are working on an A8 vehicle displays. Answer YES, if you are
working on an A8, or answer NO if not.
Figure 4-62 Sample Audi A8 Function Mode Choice Screen
5. Select Open Parking Brake from the Electronic Parking Brake (EPB) menu and press the
ENTER key.
Figure 4-63 Sample EPB Menu Screen

Related product manuals