FPV Model T20 - Remote Controller Charging

12
Receiver Parameters
Name
Modification
method
Value
Comment
Device ID
Random
0-65535
Unique ID code for pairing
between receiver and
remote controller
Serial baud
rate
Manually
modify
1200、2400、4800、
9600、
19200、3400、57600、
115200
This baud rate setting needs to
be set according to the required
baud rate for the flight control
(default is 115200)
Channel
Manually
modify
1-8
Bandwidth
Manually
modify
100K、200K
The default is 100K. The larger the
bandwidth is, the closer the
communication distance is.
Transmit
power
Manually
modify
30DBM 1W
29DBM 0.8W
27DBM 0.5W
24DBM 0.25W
20DBM 0.1W
The default is 1W. The greater the
power is, the longer the
communication distance is.
Remote Controller Charging
1. Please use the standard charger for charging.（Charging:5V-3A)
2. If there is no time to use a charger, you can use a power bank to charge
the remote controller. The remote controller can be used while charging.
3. The computer indicator will indicate solid red when charging and will go
out after full charge.
4. If you do not use it for a long time after fully charged, Please turn off the
computer to avoid standby power consumption.