Franke A200 - Commissioning the Coffee Machine; Initial Commissioning of the A200; Daily Commissioning Procedure

560
≥200
≥ 60≥ 50
613
≥ 60
i
Installation and technical data
Page 19
Prepare a stable, ergonomic surface (min. load capacity: 100 kg or 220 lb).
The operator panel should be no higher than at eye level.
Minimum clearances:
▪ To the rear wall: 50 mm
▪ Upwards: 200 mm (filling and removal of coffee bean hopper)
▪ To the right: 60mm (for removal of the brewing unit)
▪ To the left: 60mm (for opening the refrigeration unit)
Adjustable feet (optional) can be used to compensate for unevenness or
height differences.
If optional add-on units are installed, up to an additional 330mm of width
may be required.
Total height
40 mm 600mm+40mm=640mm
100 mm 600mm + 100mm=700mm
Adjustable feet
Installation dimensions of the A200 FoamMasterDimensions of the A200 FoamMaster
60540
70-180
604
613
270 340