01 02 03
4 4 4
01 02
4
03 04 05
4 4 4
4
4
Start-up, Filling and Emptying
Page 18
Handling the bean pusher and coee bean hopper
The bean pushers cannot be completely removed!
The bean pushers t relatively tightly.
Ensure proper closure and slide the bean pusher in again, if
necessary.
NOTICE
NOTICE
The quality of the coee
may be impaired!
Dry the coee bean hopper
well after cleaning it. There
must not be any residue from
cleaning agents.
Pull the bean pusher out.Place the coee bean hopper
on the Evolution Plus.
Empty, clean and dry the cof-
fee bean hopper.
Lift the coee bean hopper
straight up.
Slide the bean pusher inward
to close o the coee bean
hopper.
NOTICE
Formation of mildew due
to coee residue!
Empty and clean the grounds
container at least once daily.
Replace the grounds container
and close the grounds contai-
ner door.
Empty, clean and dry the
grounds container.
Open the grounds container
door and remove the grounds
container.
Emptying the coee bean hopper
Emptying the grounds container