Franke EVOLUTION PLUS - Installation Dimensions

min 50
min 200
320
500
160
25
785
600
80-150
Ø
8
0
Ø
1
2
0
300
315
96
210
285
320
500
160
25
785
600
80-150
Ø
8
0
Ø
1
2
0
300
315
96
210
285
Installation and technical data Page 14
Cross-section from above (grommet hole)Top view
Side viewFront view
30 mm (1.18") foot 500 mm + 285 mm + 32 mm = 817 mm
40 mm (1.57") foot 500 mm + 285 mm + 45 mm = 830 mm
70 mm (2.76") foot 500 mm + 285 mm + 70...80 mm = 855...865 mm
100 mm (3.94") foot 500 mm + 285 mm + 100...115 mm = 885...900mm
Prepare a stable, ergonomic surface (min. load capacity: 150 kg). The control
panel should be at eye level.
Distance to the wall must be at least 50 mm (1.96"). Clearance above
the machine must be at least 200 mm (7.78").
Adjustable feet can be used to compensate for unevenness or
height dierences.
If optional accessories are installed, up to an additional 320 mm
(12.6") may be required per accessory.
Observe the connection requirements of the accessories.
Adjustable feet (optional)
Installation Dimensions Dimensions