4 4
44 4 4 4
02 03 04 05 06
4
4 4 4
01 02 03 04
01
Start-up, Filling and Emptying
Page 24
Close Flavour Station door.Clean syrup system, if neces-
sary.
Remove hose and remove
syrup for required variety of
syrup.
Open Flavour Station door.
Emptying the Flavour Station
All syrups are ready.
Repeat the procedure with
all other product buttons for
syrup (syrup variety).
Release the product button if
syrup escapes from the outlet.
The syrup variety is ready.
The requested syrup is drawn
in.
Preselect a syrup within 10
seconds.
Press and hold the priming
button.
Press CLEAN on the Evolution
Plus until the Clean menu
appears.
PRIMING SYRUP
For optimum drinks quality, there must be syrup in the lines at the
very beginning.
You must prime the device so that syrup is drawn back into the
lines each time syrups are changed and after cleaning.
Priming Syrups
To Next Page
Loading...
