INSTALLING THE OVEN
STEP 1 Fix the supplied skid plates to the cabinet floor.
STEP 2 Prepare the door for removal. Flip up the locking clamps on each door hinge. Slowly
shut the door until the protruding clamps stop the movement. Pull oven door
upwards and remove.
STEP 3
Connect the oven to the electrical supply.
STEP 4 Slide the oven into the cabinet and align.
STEP 5 Reinstall the oven door.
STEP 7 Open the oven door and locate the two mounting screw holes in the oven frame.
Mark and drill (6 mm) pilot holes. Secure the oven to the cabinetry by inserting
screws through the frame and into the cabinetry. Assemble the supplied screw caps
over the screw head to conceal them.
To Next Page
Loading...
Need help?
General