TIME MANAGEMENT MENU – TIMER, DELAY/END COOKING, FOOD PROBE
START After programming the oven for cooking, touch or to enter the time
management menu.
SET T
IMER This function is simply a minute minder: the timer can be used independently from
cooking and it will not turn off the oven at the end of the set time. For the oven to
shut off automatically, select END OF COOKING (see below).
Activate the TIMER
Set the desired duration (max 10 hours) and confirm
Leave menu
The display will show the countdown. The end of the countdown will be confirmed
with a repeating tone. Tap any touch control area to stop tone.
Important! COOKING WILL NOT STOP AT THE END OF THE COUNTDOWN. TURN THE
OVEN OFF MANUALLY AND REMOVE FOOD FROM OVEN TO AVOID
OVERCOOKING.
E
ND OF COOKING The oven will automatically turn off after the set cooking time has elapsed.
Activate END OF COOKING
Set the desired duration (max 10 hours) and confirm
Leave menu
The display will show the countdown. The oven will turn off at the end of the
countdown and the display will show END OF COOKING – Ready to Enjoy! The end
of the countdown will be confirmed with a repeating tone. Touch any touch control
area to stop tone.
M
ODIFY/CANCEL Activate end of cooking menu and modify the time value.
Set time to 0:00 to cancel
Note Cooking time is calculated from the end of preheating. During preheating the end of
cooking time is not shown in the display.
It is not possible to set end of cooking when using the food probe. If a food probe
temperature is set, the end of cooking will be deleted.
To Next Page
Loading...
Need help?
General