Franke HCMF-18 User Manual

HCMF Operating Manual Page 6
Installation
(For Model HCMF-18 or HCMF-30 – High Capacity Meat
Freezers)
1 Remove Carton from Freezer
This unit will arrive in a skid-mounted carton.
CAUTION! The shipping container may have staples and
will have banding under tension, which can cause
injuries. Wear gloves and eye protection to reduce the
risk of injury when removing the carton.
 Cut the plastic banding using heavy scissors or tin snips.
Use caution to avoid contact with banding, when cut.
 Lift cardboard carton straight up and off unit.
2 Roll Unit Off Skid
 With a person on each side of the unit, grasp the freezer
at the sides.
 Keeping the crate bottom or skid stationary, lift and slide
the unit off the wood blocking, to the rear of the unit.
 When the rear wheels are on the floor, push the unit back
until all four wheels are off the skid.
 Peel protective white adhesive film from all stainless steel
surfaces, inside and outside the HCMF.
CAUTION! The HCMF-18 model weighs 265 lbs. [120 kg] and
the HCMF-30 weighs 365 lbs. [165 kg]. Do not attempt to
remove this unit from the shipping skid without assistance.

Franke HCMF-18 Specifications

General

Brand	Franke
Model	HCMF-18
Category	Freezer
Language	English