FRC Insight Ultimate Series - Specifications; Table 1. Pressure Transducer Output Voltage

FP4000 Rev0204
5
Table 1. Pressure Transducer Output Voltage
Specifications
Display Module
Supply Voltage: 9 - 30 VDC
Supply Current: 1.0 Amp
Dimensions:
Height 4.4 Inches
Width 4.4 Inches
Depth 3.4 Inches
Datalink Protocol: J1939 CAN
Flow Sensor
Type: Paddlewheel with Brass Housing for Saddle Clamp
or Weldment Mount (Stainless Steel Housing
Optional)
Sensor Material: Acetal (Delrin) with Stainless Steel (316) Shaft
Excitation Voltage: 5 VDC
Pressure Transducer
Model Number: FP3100PT2, FP4000PT1 (Alternate Part)
Pressure Range: 0 - 600 PSI
Proof Pressure: 1200 PSI
Excitation Voltage: 5 VDC
Output Voltage: 0.5 - 4.75 VDC (Refer to Table 1)
PRESSURE
(PSI)
VOLTAGE
(VDC)
00.5
100 1.21
150 1.56
200 1.92
250 2.27
300 2.625