Freestyle FREEDOM LITE - Meter Setup for Blood Glucose Test

15
Call Customer Care Toll Free at 1-888-522-5226 www.AbbottDiabetesCare.com
ENGLISH
Prepare Your Meter
Insert a FreeStyle® Lite test strip into the meter
until it stops. e meter will power on.
Note: If you do not start the test within two minutes, the meter will
turn o. To restart your meter, take out the unused FreeStyle Lite test
strip and reinsert it into the meter.
System Check Screen
Each time the meter powers on, this screen
briey appears so that you can make sure the
display is working properly.
e date and time will briey appear aer the
system check screen so that you can make sure
your meter is set to the correct time and date.
e blood drop and test strip symbols will appear
on the display screen. Your meter is now ready to
apply blood sample.
Important: The FreeStyle Freedom® Lite meter should only be used
with FreeStyle Lite test strips. Using other test strips with this meter can
produce inaccurate results.
Performing a Blood Glucose Test
1
Blood Drop and
Test Strip Symbols
System Check