The FreeStyle Lite Meter and How It Works
Display Screen
Displays your test results and other important information.
m (Mode) Button
Move to different mode settings.•
Scrolls backward.•
Silences a reminder alarm.•
Sample Areas (dark-coloured half-circles on Test Strip)
Apply blood or control solution to one Sample Area only.
Insert strip into the meter printed side up (see image to the
right).
Light Button
Controls the display backlight and test light.
c (Configure) Button
Marks a control solution test.•
Scrolls forward.•
Displays clock.•
Silences a reminder alarm.•
Test Strip Port
Insert the Top end of a new FreeStyle
Lite test strip here. The meter powers
on when you insert the test strip.
Bottom
FreeStyle Lite Test Strip
Sample Area
To p
System Check Screen
This screen always appears when the meter is turned on
so that you can make sure the display is working properly.
Do not use the meter if the system check screen does not
match the example here. Please call Customer Care.
Data Port
Download test results. Requires a
compatible data management system.
For more information, please go to our
website or call Customer Care.
To Next Page
Loading...
