WARNING
Do not use the trailer air supply for parking trail-
ers not equipped with spring parking brakes.
This applies the trailer service brakes only. As air
bleeds from the trailer brake system, brake appli-
cation is lost. This could allow the unattended
vehicle to roll away, possibly resulting in serious
personal injury or death.
2.
Chock the front and rear tires of the trailer.
3.
Disconnect the trailer air and electrical lines.
Plug the air lines to keep them free of dirt.
4.
Take the weight of the trailer drawbar eye off the
pintle hook.
5.
Push the latch lock towards the mounting plate
as far as possible then, while holding the latch
lock in this position, pull the top of the latch as
far as possible toward the pintle hook.
6.
While holding the latch in place, release the latch
lock.
7.
Slowly drive the vehicle away from the trailer.
12/08/2010 f311138
1
1
2
2
33
A B
A. Premiere 2400 Trailer Coupling B. Premiere 2200 Trailer Coupling
1. Latch Lock
2. Latch
3. Pintle Hook
Fig. 18.3, Premiere 2200 and 2400 Trailer Couplings
Trailer Couplings
18.3