Any of the above situations will lock the tilt cylinders.
To unlock the cylinders, the cab must be moved in
the opposite direction of travel.
For example, if the cab is moving toward the full-tilt
position when the lockup occurs, move the control
lever to RETURN and work the pump a few strokes
to unlock the cylinders. Move the control lever to the
TILT position and allow the cab to descend to a full-
tilt position.
If the cab is moving toward the lowered (operating)
position when the lockup occurs, move the control
lever to TILT and work the pump a few strokes to
unlock the cylinders. Move the control lever to RE-
TURN and allow the cab to descend to the operating
position.
Vehicle Access
2.12
To Next Page
Loading...
Need help?
General
