To Next Page
C
Caleb BryantSep 10, 2025
What to do if Fresenius Kabi Water Pump shows error E8?
- TTaylor RushSep 10, 2025
If your Fresenius Kabi Water Pump displays error E8, check the motor command. The manual indicates to see section §4 119 motor command.
What to do if Fresenius Kabi Water Pump shows error E8?
If your Fresenius Kabi Water Pump displays error E8, check the motor command. The manual indicates to see section §4 119 motor command.
What to do if my Fresenius Kabi Water Pump is showing error E5?
If your Fresenius Kabi Water Pump displays error code E5, you should check the battery voltage, referring to section §4 batte 51 voltage in the manual. If the problem persists, consider replacing the CPU board or the battery.
What to do if my Fresenius Kabi Water Pump is showing error E6?
If your Fresenius Kabi Water Pump displays error code E6, you should check the battery temperature, referring to section §4 50 battery temperature in the manual. If the problem persists, consider replacing the CPU board or the battery.
How to fix error E22 on Fresenius Kabi Water Pump?
To address error E22 on your Fresenius Kabi Water Pump, check the motor command referring to section §4 motor command "119 ". If the issue continues, re-calibrate the pump, and if needed, replace the gear motor or the pump unit.
How to fix error E23 on Fresenius Kabi Water Pump?
To address error E23 on your Fresenius Kabi Water Pump, check the motor command referring to section §4 motor command "119 ". If the issue continues, re-calibrate the pump, and if needed, replace the gear motor or the pump unit.
How to fix error E15 on Fresenius Kabi Water Pump?
To fix error E15 on your Fresenius Kabi Water Pump, check the optical disk. If the problem persists, replace the CPU board.
What to do if Fresenius Kabi Water Pump displays error E20?
If your Fresenius Kabi Water Pump displays error E20, check the door position. The manual indicates to see section §4 door positio (signal out of range) "100.
How to fix error E9 on Fresenius Kabi Water Pump?
To fix error E9 on your Fresenius Kabi Water Pump, re-calibrate the pump.
What should I do if my Fresenius Kabi Water Pump displays E1?
If your Fresenius Kabi Water Pump displays error E1, you should check the door position. The manual indicates to see section §4 do 100 position.
How to solve error E17 on Fresenius Kabi Water Pump?
To solve error E17 on your Fresenius Kabi Water Pump, replace the CPU board.
General| Device Type | Enteral Feeding Pump |
|---|---|
| Manufacturer | Fresenius Kabi |
| Model | APPLIX SMART |
| Display | LCD |
| Flow Rate Accuracy | ±5% |
| Volume Range | 1 to 9999 ml |
| Power Supply | AC adapter or built-in rechargeable battery |
| Infusion Modes | Continuous, Intermittent |
| Occlusion Pressure Levels | Adjustable |
| Alarms | Occlusion, Air-in-line, Low battery |
| Data Logging | Yes |
| Battery Life | Approximately 24 hours at 125 ml/h |
