Friedrich VERT-I-PAK VHA18K34RTQ User Manual

12 PB
Vert-I-Pak is designed to install through an exterior wall with a plenum (VPAWP1-8, VPAWP1-14) and an external louver. If the default
plenum and louver combinations are not used, the selections and design must be evaluated by us to ensure the total pressure drop does not
exceed the maximum allowable limits.
Condenser External Pressure
Model Design Maximum
CFM ESP (“WP) ESP (“WP)
VHA09 650 0.03 0,12
VHA12 650 0.03 0,12
VHA18 950 0.03 0,12
VHA24 950 0.03 0,12
Table 106 (Airow Data)
SPECIFICATIONS
Airow Data (Condenser)

Friedrich VERT-I-PAK VHA18K34RTQ Specifications

General

Brand	Friedrich
Model	VERT-I-PAK VHA18K34RTQ
Category	Heat Pump
Language	English