7 PB
INTRODUCTION
Operation of Equipment in During Construction
• OPERATION OF EQUIPMENT MUST BE AVOIDED DURING CONSTRUCTION PHASES WHICH WILL PRO-
DUCE AIRBORNE DUST OR CONTAMINANTS NEAR OR AROUND AIR INTAKE OPENINGS:
• Wood or metal framing;
• Drywalling or sheathing,
• Spackling or applying joint compound.
• Sanding or grinding.
• Moulding or trimwork.
• Concrete dust.
• Insulation .
• Spray foam.
• Stucco spray and mortar.
• Plastic sheathing.
NOTICE
Operating the equipment during any phase of
active construction noted above can void the
equipment’s warranty, and also lead to poor
performance and premature failure.
To Next Page
Loading...
Need help?
General