157
15.14 Alarms Summary Table
S. NO. Alarm Code
Alarm
Description
Fault
Condition
Possible Fault
Machine Action/
Status
Action
to
Clear
Page
No
33 EBE
(EHE)
Motor Control
Board Relay
error
Incongruence
between
safeties relay
sensing and
Motor Control
Board relay
status
Motor Control Board Relay
defective
Wiring or main board
defective
Safety drain
Cycle abort
RESET 191
34 EBF
(EHF)
Motor Control
Board relay
sensing error
Input voltage
value on
microprocessor
always to 0V or
to 5V
Main board Safety drain
Cycle abort
RESET 191
35 EC6 Clutch Alarm Clutch
positioning
timeout to
reach or failure
to stay in
desired position.
Clutch mechanism failure
Main board defective
Wiring/connection problem
Cycle abort - 192
36 EC7 Clutch triac
sensing Failure
The sensing of
the clutch triac
is out of the
limits.
Clutch mechanism failure
Main board defective
Wiring/connection problem
Cycle abort - 193
37 EF2 Foam warning Suds lock
detected during
spin phase at
the end of the
washing phase
Incorrect or excessive
detergent
Drain pipe blocked or
clogged
Alarm is silent
and the cycle is
extended
- 194
38 EF6 Safety reset Main Board
microcontroller
damaged
Main Board defective None - 194