Frigomat G5 - Page 84

FRIGOMAT G5 G10 M04.37562 R.2021.10.23 ii
EN
IT
FR
DE
ES
G5 - DIMENSIONAL DRAWINGS
TECHNICAL SPECIFICATIONS
The declared production capacities are only indicative and may vary depending upon the conditions of operation and the products used.
For exact electrical information, always refer to the data label of the unit.
Specification subject to change without notice.
Frigomat S.r.l.
Via 1°Maggio, 28 - 26862 Guardamiglio (LO), ITALY
+39 0377 415011 frigomat@frigomat.com www.frigomat.com
G5 - DATA SHEET - R2021.12.20
Electrical
One dedicated electrical connection is required. See the Electrical
chart for the proper electrical requirements. Manufactured to be
cord connected (Schuko plug). Consult your local Frigomat distri-
butor for specifications as local codes allow.
Freezing Cylinder
1 x 4.5 lt. (4.8 quart).
Beater Motor
1 x 185 W (1/4 HP).
Refrigeration System
1 x ~486 W R290 (1x 130g)
(@ - 23.3°C evap. / + 45°C cond.)
Air Cooled
Minimum 100 mm (4”) on right and rear sides and 300 mm (12”) on
left. Minimum air clearances must be met to ensure adequate air
flow for optimum performance.
Sound pressure level
< 68 dB (A)
Accessories
-
model production tank
cooling
**
power supply - consumption
max
fuse
size
net
weight
crated
weight
kg/h n. x lt. V Hz Ph - A kW V Hz Ph - A kW kg kg
G5 5 1 x 1,7 A 230V 50Hz 1 - 4.5A 0,7 kW 115V 60Hz 1 - 9.0A 0,7kW - 48 62
** A = Air
width : 490 mm depth : 508 mm height * : 425 mm crated volume : 0,3 m
3
* mounted on standard feet h=25mm (1”)