13
Note 1: the temperature in the freezer may rise if loaded with “hot” products. The high temperature alarm could
trigger.
Note 2: The On/Off switch only cuts off the internal 24V power supply requested by the processor and display. The
freezer remains powered as long as the power cable is connected to the mains.
Qualified staff must perform any electrical maintenance.
When the device is installed, the injection must only be activated once the target temperature has been
reached, otherwise the cylinders will be unloaded during the first temperature decrease.
Switch position (set
back within the
freezer)
Close-up view of the switch
To Next Page
Loading...
