42
Power and control rack
10.5 DOOR BEARINGS
Your Froilabo freezer is delivered with 2 extra door bearings.
In case of intensive use of the freezer, this part may have to
be replaced.
When the bearing is damaged, it should be replaced with the
ones supplied (x2) with the freezer, as described in the
procedure below:
• Open the door
• Remove the screw with a suitable tool
• Remove the washer and the damaged bearing.
• Replace the new bearing, then the washer and put in
the screw, tightening by hand
• Close the door
The BoSS protection system makes use of
these normally closed power contactors.
To Next Page
Loading...
