42
TIG Comfort Stop For more information on activating and setting the TIG Comfort Stop function, see
Parameters for TIG welding on page 45.
Function and application of TIG Comfort Stop:
Welding
During welding, raise the welding torch
- The arc length is increased significantly
Lower the welding torch
- The arc length is decreased significantly
- This triggers the TIG Comfort Stop function
Keep the welding torch at the same height
- The welding current continually decreases (downslope) until the arc goes out
Wait for the gas post-flow time to finish and lift the welding torch away from the work-
piece
Welding current and gas flow with TIG Comfort Stop function activated
1 2 3 4 5+
1
3
4
5
t
t
down
I
Max. A
70 A
(1)
(2)
1 2
3 4 5+
To Next Page
Loading...
