65
EN
Operating modes Charging
Starts automatically when the battery charger is connected to the power source and the
mains
- The CHARGING indicator is lit
- Mains indicator lit
- The power source is charged at optimum charging power
- The charging characteristic of this mode maximises the service life of the power
source
- When the COMPLETED indicator lights up, the power source is fully charged
and the battery charger switches to conservation charging mode
Quick charging
Activation:
Press the QUICK CHARGING button
- The QUICK CHARGING indicator is lit
- Mains indicator lit
- The power source is charged at the maximum possible charging power
- When the COMPLETED indicator lights up, the power source is fully charged
and the battery charger switches to conservation charging mode
Deactivation:
Press the QUICK CHARGING button again
- Charging mode resumes
Conservation charging
Starts automatically once the battery charger has fully charged the power source
- Mains indicator lit
- The COMPLETED indicator is lit
- The power source is charged at conservation charging power
- In this mode, the power source can remain connected to the charger without being
damaged.
Hybrid mode
= the battery charger is charging the power source while the power source is in operation
Acivation:
Start welding during charging
or connect the power source to the charger while it is in operation
- The QUICK CHARGING indicator is lit (charging at the maximum possible
charging power in hybrid mode)
- Mains indicator lit
- The power source is discharged according to its operating load and simultaneously re-
charged by the charger
1
1
To Next Page
Loading...
