46
Software version
The full version number of the currently installed software is spread across a number of
displays and can be retrieved by turning the adjusting dial.
Automatic switch-off (time Shut down)
300 - 9000 Seconds / OFF
If the power source is not operated for the specified length of time, it switches off automat-
ically.
Factory setting: 900 seconds
Factory setting (FACtory)
no / YES / ALL
The power source can be reset to its factory settings here.
- Cancel reset
- Reset the parameters for the selected welding process to their factory settings
- Reset the parameters for all welding processes to their factory settings
Resetting of the selected value to its factory setting must be confirmed by pressing
the adjusting dial.
To Next Page
Loading...
