DownSlope, 2-step mode
DownSlope, 4-step mode
Unit s
Setting range 0.0 - 9.9
Factory setting 1.0
IMPORTANT! The DownSlope is saved separately for 2-step and 4-step modes.
Final current, 2-step mode
Final current, 4-step mode
Unit % (of main current)
Setting range 0 - 100
Factory setting 30
only with MagicWave for the TIG AC welding process
Unit 1
Setting range -5 - +5
Factory setting 0
-5: highest fusing power, lowest cleaning action
+5: highest cleaning action, lowest fusing power
If cold wirefeeder option is available
Unit m/min ipm
Setting range OFF / 0.1 - max. OFF / 3.9 - max.
Factory setting OFF
53
EN
To Next Page
Loading...
Need help?
General
