Fronius Primo 8.2-1 - Page 120

120
If applicable reconnect the data com-
munication lines to the inverter
Fasten the inverter to the wall bracket
with 2 x 5x25 mm TX25 screws (4)
Tightening torque = 2.5 Nm
Attach the DATCOM cover (6) and fix
with 2x TX25 screws (5)
Tightening torque = 2.5 Nm
Set the DC disconnector (7) to ON
(4)(4)
5
6
(7)
(5)
(5)(6)
7
8