Fronius Robacta PTW 3500 - PTW 1500 Options; PTW 3500 Options; PTW 500 Options

PTW 500 opti-
ons
-
Hot wire option
-
Plasma nozzle 0.6 / 0.8 / 1.0 / 1.4 / 1.6 mm
-
Adapter for the non-digital PlasmaModul
-
Cold wire feeder with drive (push-pull system): Robacta Plasma KD Drive
-
Cold wire feeder (push system): Robacta Plasma KD
-
Drag gas nozzle 50 / 100 mm
PTW 1500 opti-
ons
-
Adjusting gauge ∅ 1.5 - 2 mm
-
Cold wire feeder with drive (push-pull system): Robacta Plasma KD Drive
-
Cold wire feeder (push system): Robacta Plasma KD
-
Hot wire option
-
Plasma nozzle 1.0 / 1.5 / 2 / 3 mm; 2.0 x 29 mm long
-
Ceramic centring tube 1.6 / 3.2 mm
-
Clamping sleeve 1.6 / 3.2 mm
-
Adapter for the non-digital PlasmaModul
-
Drag gas nozzle 50 / 100 mm
PTW 3500 opti-
ons
-
Cold wire feeder with drive (push-pull system): Robacta Plasma KD Drive
-
Cold wire feeder (push system): Robacta Plasma KD
-
Hot wire option
-
Plasma nozzle 2.0 / 2.5 / 3.5 / 4.0 mm
-
Plasma nozzle 2.0 / 2.5 / 3.2 / 3.5 / 4.0 mm with 4 x 1 mm balance holes
-
Conical plasma nozzle
-
Ceramic centring tube 6.4 mm
-
Clamping sleeve 6.4 mm
-
Adapter for the non-digital PlasmaModul
-
Drag gas nozzle 50 / 100 mm
-
Ceramic gas nozzle + appropriate stop ring
27
EN