Fronius Robacta PTW 3500 - Adjusting the Tungsten Electrode; Adjusting the PTW 500 Tungsten Electrode

Adjusting the
PTW 1500
tungsten elec-
trode
1
Loosen the torch cap - caution, the tungsten
electrode may fall out of the plasma torch if the
torch is in a particular position.
1
1
Place adjusting gauge onto plasma nozzle ...
2
... and adjust tungsten electrode
3
max. 3 Nm
1
Fix the tungsten electrode in place using the
torch cap
4
Adjusting the
PTW 3500
tungsten elec-
trode
2
Loosen the torch cap - caution, the tungsten
electrode may fall out of the plasma torch if the
torch is in a particular position.
1
2
Place adjusting gauge onto plasma nozzle ...
2
33
EN