Start-up
Safety
WARNING!
Danger from incorrect operation and work that is not carried out properly.
This can result in serious personal injury and damage to property.
▶
All the work and functions described in this document must only be carried
out by technically trained and qualified personnel.
▶
Read and understand this document in full.
▶
Read and understand all safety rules and user documentation for this device
and all system components.
Proper use The plasma torch is intended exclusively for plasma welding and plasma brazing.
Utilisation for any other purpose, or in any other manner, shall be deemed to be
„not in accordance with the intended purpose“. The manufacturer shall not be li-
able for any damage resulting from such improper use.
Utilisation in accordance with the „intended purpose“ also comprises
-
following all the instructions in these operating instructions
-
carrying out all the specified inspection and servicing work
Start-up
1
Mount plasma torch onto robot
2
Check plasma torch to see whether:
-
all parts are present
-
the parts have been correctly fitted
NOTE!
An incorrectly adjusted tungsten electrode can damage the plasma nozzle du-
ring commissioning. Adjust the tungsten electrode according to the plasma
nozzle used and the application.
3
Adjust the tungsten electrode using the adjusting gauge
4
Connect the components of the plasma torch hosepack to the plasma de-
vice:
-
Current/shielding gas connection
-
Pilot flow cable
-
Cable for pilot flow mass/plasma gas
-
Water return hose
-
Water flow hose
35
EN
To Next Page
Loading...
