Fronius Robacta Reamer Braze+ - Screwing the Cleaning Device to the Solid Surface; Screwing the Cleaning Device to the Surface

Screwing the Cleaning Device to the Solid Sur-
face
Screwing the
cleaning device
to the surface
NOTE!
Depending on the solid surface (base) you have, you may need to use a different
mounting material to screw the device in place.
The installer is responsible for selecting the proper mounting materials.
NOTE!
Position the cleaning device on a level, solid and vibration-free surface (founda-
tion).
Position the cleaning device so that the robot's approach route to the cleaning
position is as short as possible.
1
NOTE!
Before installing the cleaning device,
ensure that the surface for the clean-
ing device is flat and level.
1
4x
2
2
2
30