Setting up the Compressed Air Supply
Setting up the
cleaning device
compressed air
supply, com-
pressed air relief
valve function
Set up the compressed air supply:
1
Disconnect the compressed air supply to the cleaning device and ensure that
this compressed air supply remains disconnected while the tasks described
below are being carried out on the device
2
Screw the supplied compressed air relief valve on to the compressed air con-
nection on the cleaning device
3
Connect the compressed air supply to the compressed air relief valve
NOTE!
You can interrupt and restore the compressed air supply to the cleaning device
by moving the compressed air relief valve back and forth.
The illustration to the left shows the
compressed air relief valve closed =
compressed air supply to the device in-
terrupted
The illustration to the left shows the
compressed air relief valve open =
device is being supplied with com-
pressed air
33
EN-US
To Next Page
Loading...