Fronius Robacta Reamer Braze+ - Cleaning Program Sequence

Cleaning Pro-
gram Sequence
Output query (output signal ready for
cleaning)
- Low or high
Move to position A
- Machine zero position
- Speed: High speed mode
Query = low
(Cleaning blade faulty or the cleaning
head has not reached the end
position )
Start
Set
- Input “Calibrate cleaning head”
Wait two seconds
Reset
- Input “Calibrate cleaning head”
Stop
Query = high
(device is ready for cleaning)
Output query (output signal ready for
cleaning)
- Low or high
Query = high
(Device is ready
for cleaning)
Query = low
(Cleaning blade
faulty or
cleaning head
not in cleaning
position)
42