Fronius Robacta Reamer Braze+ - Page 43

Move to position D (cleaning position)
- 30 mm (1.18 inch) below position C
- Speed: 120 cm/min
(47.24 ipm)
Wait two seconds
Set
- Input “Start cleaning motor”
Reset
- Input “Start cleaning motor”
Wait one second
Move to position C
- 50.5 mm (1.99 inch) below the
machine’s zero position
- Speed: 60 cm/min
(23.62 ipm)
Move to position B
- 30 mm (1.18 inch) below the
machine’s zero position
- Speed: High speed mode
Withdraw wire electrode up to behind
the contact tip
– see diagram opposite
43
EN-US