Safety
Safety Follow the safety rules below when carrying out all the tasks described in the
"Service, maintenance, and disposal" chapter.
WARNING!
Danger from incorrect operation and work that is not carried out properly.
This can result in severe personal injury and damage to property.
▶
All the work and functions described in this document must only be carried
out by trained and qualified personnel.
▶
Read and understand this document.
▶
Read and understand all the Operating Instructions for the system compon-
ents, especially the safety rules.
WARNING!
Danger due to machines starting automatically.
This can result in severe personal injury and damage to property.
▶
In addition to these Operating Instructions, observe the safety rules of the
robot manufacturer and welding system manufacturer.
▶
For your personal safety, make sure that all protective measures have been
taken in the robot's operating area and remain in effect while you are in this
area.
WARNING!
If the cleaning device is being supplied with voltage and/or compressed air, the
following poses a danger of serious injury:
▶
the rotating cleaning head
▶
the cleaning head that moves up and down
▶
flying debris (chips, etc.)
▶
activated wire cutter
If work is required on the cleaning device while the cleaning device is being sup-
plied with voltage and/or compressed air:
▶
ensure that no body parts (especially fingers, hands, and hair) and objects
and items of clothing get caught in the cleaning head
▶
stay away from the wire cutter
▶
wear hearing protection
▶
wear protective goggles with side protection
CAUTION!
Danger from hot cleaning head as a result of operation.
This can result in burns.
▶
Before handling the cleaning head, allow it to cool to room temperature
(+25 °C, +77 °F).
49
EN-US
To Next Page
Loading...