Always integrate the device into a superordinate safety system in a secured area.
If this area has to be accessed for preparatory or maintenance work, ensure that
-
the entire system is shut down for the duration of access to this area
-
and remains shut down to prevent unintended operation, for example, as a
result of a control error.
If untrained operating personnel have access to the device, the compressed air
supply to the device must be disconnected for the duration of this access in ac-
cordance with "Performance Level d" of ISO 13849-1.
In addition to these Operating Instructions, the safety rules of the robot manu-
facturer must be followed.
The human body, and in particular the hands, face and hair, plus items of clothing
and all tools, must be kept away from moving components, such as:
-
the rotating cleaning head
-
the cleaning head that moves up and down
Do not touch the cleaning head immediately after operation – burning hazard.
Follow the special safety rules for handling the cleaning head in the Operating
Instructions.
Protect the hands, face, and eyes from flying parts (chips, etc.).
Covers must only be opened/removed during maintenance, installation and re-
pair work.
During operation:
-
ensure that all covers are closed and all side parts have been mounted prop-
erly,
-
keep all covers closed.
Personal Protec-
tion and Protec-
tion of Others
You are exposed to numerous hazards while handling the device. In addition to
these Operating Instructions, the safety rules of the manufacturer of the entire
welding system must be followed.
Keep persons, especially children, away during the operation of the devices and
during the welding process. If persons are in the vicinity, however:
-
instruct them about all hazards (crush hazard posed by moving mechanical
parts, flying chips or similar, injury hazard due to flying sparks, blinding haz-
ard due to arcs, welding fume hazardous to health, noise exposure, possible
hazard due to mains current or welding current, etc.)
-
provide suitable protective equipment or
-
construct suitable protective walls and curtains.
EMC Device
Classifications
Devices in emission class A:
-
Are only designed for use in industrial settings
-
Can cause line-bound and radiated interference in other areas
Devices in emission class B:
-
Satisfy the emissions criteria for residential and industrial areas. This is also
true for residential areas in which the energy is supplied from the public low-
voltage grid.
EMC device classification as per the rating plate or technical data.
7
EN-US
To Next Page
Loading...