8
Explanation of
symbols - instal-
lation position
All inverters are designed to be dust-tight. However, in areas with a
heavy build-up of dust, the thermal efficiency may still be impaired by
dust forming on the cooling surfaces. Regular cleaning is necessary in
such situations. It is therefore not recommended to mount the device in
rooms or areas in which a heavy build-up of dust is expected.
Do not install the inverter in:
- greenhouses
- storage or processing areas for fruit, vegetables or winegrowing
products
- places used to prepare grain, green fodder or animal feeds
The inverter is designed to be installed vertically on a vertical wall or pil-
lar.
The inverter is suitable for horizontal installation.
The inverter is suitable for installation on a sloping surface.
Do not install the inverter on a sloping surface with its connection sockets
facing upwards.
Do not install the inverter at an angle on a vertical wall or pillar.
Do not install the inverter horizontally on a vertical wall or pillar.
To Next Page
Loading...
Need help?
General