Fronius TPS 270i C Quick Guide

/ Perfect Welding / Solar Energy / Perfect Charging
TPS 270i C
Quick Guide
SAFETY
Before working with the device, ensure that you have read and understood all the documents provided in hard copy and online.
This document only describes the most important functions of the device. For a complete description of the device, refer to the Operating Instructions.
1
Set the filler metal and shielding gas
- Open the material
selection
- Turn and press to
enable the desired
settings
2
Set the welding process
- Press to select the desired
welding process
2
Set the operating mode
- Press to select the desired
mode
4
Set the welding power
Sheet thickness
Welding current
Wire speed
Special function F1
- select desired parameter
- set desired parameter
5
Adjust the parameters for correction
Arc length correction
Welding voltage
Pulse/dynamic correc-
tion
Special function F1
- select desired parameter
- set desired parameter
Text display:
- Activate / deactivate = press left adjusting dial
- Scroll through full text = turn left adjusting dial
Abbreviation Full text
Status indicators:
(light up when the
respective function is
active)
Spatter Free Ignition
Arc length stabilizer
SynchroPulse
Penetration stabilizer
Voltage Reduction Device
42,0426,0248,EN 002-16082017
Operating Instructions:
www.fronius.com/tpsi-manuals

Fronius TPS 270i C Specifications

General

Brand	Fronius
Model	TPS 270i C
Category	Welding System
Language	English