Fronius TransPocket 1500 - Removing Welding Sockets; Removing the Front of the Housing

109
- Undo the 5x10 - TX20 screw on the
floor of the housing
- TP 1500 TIG: Loosen the hexagon nut
(69) (width-across=13) for the screw-
fixing of the socket
- TP 1500 TIG: In the socket, loosen
the M5x12 (TX20) screw (70)
- TP 1500 / TP 1500 RC: In the
socket and in the socket, loosen the
M5x12 (TX20) screw (70)
- Working from the inside of the housing
towards the outside, push the welding
sockets (13) or (14) out of the front of
the housing
Removing the
front of the
housing
- TP 1500 TIG: Open the hose clamp
(18) and take out the gas hose (17)
Removing the
welding sockets
(92)
Fig.15
(69)
Fig.13
(70)
(70)
Fig.14
TP 1500 TIG TP 1500 / TP 1500 RC
(13) (14)(14) (14)
Fig.12
(14)
(18)
(17)
Fig.11