Fronius TransPocket 180 - Opening the Housing; Opening the TP150 Housing

82
Opening the housing
Opening the
TP150 housing
Remove the two PT 4x12 TX 20
screws (1) on the insert.
Swing the control panel (2) to one side
and unplug the ribbon cable.
Remove the four M5x25 TX25 screws
(3) on the front of the device.
Remove the four M5x25 TX25 screws
(4) on the rear of the device.
Remove the handle.
(1) (1)(2)
1
2
(3)
(3)
3
(4)
(4)
4
5