25
EN
System components
General The power sources can be operated with various system components and options. This
makes it possible to optimise procedures and to simplify machine handling and operation,
as necessitated by the particular field of application in which the power source is to be
used.
Safety
Overview
TSt 2500c / TSt 2700c
No. Function
(1) Welding torch
(2) Gas cylinder holder stabiliser
(3) Power source
(4) Trolley and gas cylinder holder
(5) Grounding (earthing) cable and electrode cable
WARNING! Operating the equipment incorrectly can cause serious injury and
damage. Do not use the functions described until you have thoroughly read and
understood the following documents:
- these operating instructions
- all the operating instructions for the system components, especially the safe-
ty rules
(1)
(2)
(3)
(4)
(5)
To Next Page
Loading...
