58
1 2
Feeding in the
wire electrode
1 2
IMPORTANT! To facilitate wire threading, the following sequences are possible when the
"Wire threading" button is pressed and held down.
1
2
CAUTION! Risk of injury from springiness of spooled wire electrode. When insert-
ing the wire electrode into the 4-roller drive, hold the end of the wire electrode
firmly to avoid injuries caused by the wire springing back.
CAUTION! Risk of damage to the welding torch from sharp end of wire electrode.
Deburr the end of the wire electrode well before feeding in.
1
2
CAUTION! Risk of injury from wire electrode emerging at speed. When pressing
the "Wire threading" button or the torch trigger, keep the welding torch away from
your face and body, and wear suitable protective goggles.
To Next Page
Loading...
