Fronius TransSteel 3000c Pulse - Page 30

Control panel
(1)
(2)
(3)
(4)
(5)
(6)(7)
(14)(13) (17)
(12)
(11)
(10) (8)
(9)
(15)(16)
No. Function
(1) "Parameter selection" button (right)
a) for selecting the following parameters
Arc length correction
For correcting the arc length
Welding voltage in V *)
Before welding begins, the device automatically displays a standard value based
on the programmed parameters. The actual value is displayed during welding.
30